亚洲熟妇AV乱码在线观看,亚洲青草,国产精品三,四区,在线a人片免费观看视频

歡迎進入深圳市漢斯福特科技有限公司網站!
13352927502
產品中心

Product Center

當前位置:首頁  -  產品中心  -  儀表  -  顯示儀表  -  DPM-3 數字儀表
DPM-3 數字儀表
產品簡介

稱重儀表也叫稱重顯示控制儀表,是將稱重傳感器信號(或再通過重量變送器)轉換為重量數字顯示,并可對重量數據進行儲存、統計、打印的電子設備,常用于工農業生產中的自動化配料,稱重,以提高生產效率

產品型號:
更新時間:2024-06-26
廠商性質:代理商
訪問量:77
詳細介紹在線留言

稱重儀表也叫稱重顯示控制儀表,是將稱重傳感器信號(或再通過重量變送器)轉換為重量數字顯示,并可對重量數據進行儲存、統計、打印的電子設備,常用于工農業生產中的自動化配料,稱重,以提高生產效率。

 

美國Transducer Techniques DPM-3是一款智能插拔式TEDS IEEE 1451.4儀表,連接稱重傳感器或者扭矩傳感器TEDS接頭,可自動校準。

The DPM-3 is a smart Plug & Play TEDS IEEE 1451.4 compliant Digital Panel Mount Load Cell meter. Just plug in a TEDS compatible Load Cell or Torque Sensor and the DPM-3 will automatically self-calibrate. When used with a non-TEDS Load Cell or Torque Sensor, the DPM-3 can be set up by simple front panel push buttons. The DPM-3 can be scaled to a full 5 digit display from 0 to 99,999 counts to read directly in engineering units such as grams, ounces, pounds, etc. The DPM-3 samples 60 readings per second (50 for 50Hz operation) for fast control response and true peak/valley reading capability. The meter has an adaptive digital filter that can automatically select the best time constant for minimum noise, yet respond rapidly to an actual change in signal level. The peak and valley values can be displayed by a push of a button on the front panel. Auto-tare allows the meter to be set to zero for any input signal level. Available options include dual relays, analog output, serial communications, and low voltage power supply.


  • Approved

  • Plug & Play IEEE 1451.4 Compliant

  • Digital and or analog triggering

  • Setup by front panel push buttons

  • Peak / Valley hold and auto tare

  • Plug-in screw terminals

  • Automatic, adaptive digital filtering

  • 60 Conversions per second for fast control

  • response and True peak reading

  • Scalable to 5 digits engineering units to

  • ±.99,999

  • Worldwide input power 85 to 264 VAC

  • and 90 to 300 VDC

  • Isolated 5, 10, or 24 VDC output provides

  • load cell excitation


Input Voltage rating (standard) 85-264 Vac or 90-300 Vdc

Input Voltage rating (low voltage option) 12-32   Vac or 10-48 Vdc

Power Line Frequency DC and 47-63 Hz

Power Consumption, Max 5 Watts

Recommended Load 350-10K ohm bridge

Voltage & Current Levels (jumper selectable) 5 Vdc ±5%,   100 mA max

10 Vdc ±5%, 120 mA max

24 Vdc ± 5%, 40 mA max

Excitation Output Ripple 100 mVp max

Isolation from power and outputs 250 Vac

Insulation dielectric strength to power and outputs 3.5 kV ac   for 5 sec, 2.3 kV ac for 1 min

Isolation to signal common 50 Vdc

Power to Relay Option Powered by meter

Setpoint Setup Via front panel pushbuttons or RS232/485

Update Rate 56/s at 60 Hz, 47/s at 50 Hz

Response to input signal (min) Display update rate

Input Signal (selectable) Filtered or unfiltered input signal

Actuation Modes (selectable) Above or below setpoint, latching   or non-latching, disabled

Output Time Delay (selectable) 1 to 128 readings

Front Panel Enable / Lockout Modes (selectable) 1) Display and   change setpoints

2) Display but do not change setpoints

3) Neither display nor change setpoints

Alarm Status Indication 2 or 4 red LED lamps

Status Indication Setup (selectable) Lit when output is ON or   OFF, or disabled

Form C, SPDT Relay Output:

AC Rating 8A @ 240 Vac

DC Rating 8A @ 24 Vdc

Isolation rating between signal common and contacts 250 Vac

Insulation dielectric strength between signal common and   contacts

3.5 kV ac for 5 sec, 2.3 kV ac for 1 min

Form A, SPST Solid State Relay Output:

AC Rating 120 mA @ 140 Vac

DC Rating 120 mA @ 180 Vdc

Isolation rating between signal common and contacts 250V ac

Insulation dielectric strength between signal common and   contacts

3.5 kV ac for 5 sec, 2.3 kV ac for 1 min

Power to Analog Output Option Powered by meter

Output Levels 0-20 mA, 4-20 mA, 0-10V, -10   to +10V

Voltage Compliance, 0-20 mA Output 12V (0-600 Ohm load)

Current Compliance, 0-10V, -10 to +10V Output 2 mA (5 kOhm or   higher load)

Accuracy Meter input accuracy ±0.02% of full scale analog   output

Resolution 16 bit (1 part in 65,536)

Response Time 50/60Hz update rate

Scaling of Reading for Zero Output -99,999 to +99,999

Scaling of Reading for Full Scale Output -99,999 to +99,999

Isolation rating between signal common and analog output 250V   ac

Insulation dielectric strength between signal common and   analog output

3.5 kV ac for 5 sec, 2.3 kV ac for 1 min

Control Inputs (CMOS/TTL levels, logic 0 = tied to digital   ground, logic 1 = open)


訂貨型號

DPM-3 N/A Digital Panel Meter

Options

DPM-3-OPT-C N/A Dual Relay Board

DPM-3-OPT-H N/A Analog Output Board

DPM-3-OPT-T N/A Serial Data Board (RS-232)

DPM-3-OPT-TRS485 N/A Serial Data Board (RS-485)

DPM-3-OPT-U N/A Serial Data Board (USB)

DPM-3-OPT-URS485 N/A Serial Data Board (USB & RS485)

DPM-3-OPT-V N/A Low Voltage Power Supply

 

配件

DPM-3-AD9 N/A Adapter Connector

DPM-3-SPC N/A DPM-3-SPC Splash Proof Cover

USB-2.0A/B N/A USB 2.0 A/B 10ft Cable

DPM-3-RJ11AD9 N/A RS232 Cable

DPM-3-PC6 N/A 6 Foot Power Cable

DPM-3-PC12 N/A 12 Foot Power Cable

DPM-3-TRES N/A TEDS Reader Editor Software

DPM-3-DLS N/A Data Logging Software


相關型號

DPM-2

SSI

SSI-HV

SSI-LV

LCA-RTC

TMO-2


DPM-3 01.png

上一個:SSI 稱重儀表

返回列表

下一個:DPM-3 數字儀表

在線留言

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

相關文章

RELATED ARTICLES

TEL:0755-26552352

掃碼加微信